Product Type: Woodworking jig for a table saw. 
Tool Kind : Table Saw Jig, auxiliary fence, or Box joint, finger joint jig.
Skill level: Medium or more. Some table saw experience, and use of basic measuring tools.   
Machine Required: Table Saw  with 2 standard 3/4" milled miter grooves recommended. Some inexpensive saws have T slot miter grooves and they might not work as well with jigs like the original straight milled grooves, but they could be ok with some adjustments.  The Ryobi Saw may be the only medium to industrial grade saw which doesn't have the standard 3/4 milled grooves in the table. 
           Item (Jig) Specifics - The Minnie Cut Box Joint Jig includes an abundance of relevant and useful  instructions for clarity. Windows CD manual...(PDF manual too) Exclusive and accurate "instant" setting gauges plus more.
Item Condition- NEW, the Minnie Cut has a nice polished varnish or clear shellac finish.  It arrives in a nice oak storage box with a little bit of classy looking brass decoration ... It is made with top cabinet grade oak plywood....with precision made, solid, hand finished and hand checked  interchangeable hardwood gauges.

__________________


The Minnie Cut is approximately 5"High by 22"Long.  Note....This jig, and the included manual is very educational and filled with key insight, clear details and lots of potential.  One of the features of this jig includes the bottom support.  This is needed for more support when used with only your miter gauge, but can easily be removed.  We also include our exclusive interchangeable gauges.  You will like this easy to use jig,  and appreciate it's simplicity  to demonstrate vital, necessary methods that ensure precision. It demonstrates all the right moves. It's not just a jig, its like a "learning" center too.

Your saw should have 3/4" milled slots in the table.  All others sized slots might, not always, but might  possibly require you to make some modifications.  If you have a saw with 3/4" slots, you should be good to go!