Woodjig.com
Tricks of the trade!
[HOME] [TIPS] [FAQ] [ABOUT] [ORDERS] [MASCUT 1.0]
[MINNIE] [MORE][LINKS][ARTICLES][SITE MAP] [NEW BOOKS]

"At all times it is better to have a method."  And, the next level of skill could be 
in learning to use a few "Not so common measuring devices."

The best woodworking tools 
might just be the micrometer or the dial caliper. 

How to read calipers and micrometers for
woodworking ....Micrometer


GOT WOOD?
Hack your table saw.... (Know more about it than ever).
Download the Box joint manual  Here.
includes FREE.. "The 50 Giants of Industry"  


To use a micrometer seems like overkill for most applications.  Learning how to use them requires an added amount of discipline, but then it gives more flexibility and 
the confidence that could be needed at times.  

There really is a "secret technique" 
to making box joints "finger joints"

____________________________________________

How to use a micrometer.
Part 2 here
Below are a few demonstrations, and by following the 
links you will find a couple of very clear demonstrations
for reading micrometers.

Click on the pictures...

Our  e-book for making box joints...
filled with tips and detailed pictures.  Read more Here.

To clean a micrometer, close them all of the way, clamping a piece of 
paper.  Then pull the paper out rubbing the tips of the spindle and anvil clean.

Checking a micrometer...
Seen above is a 1" master gage for checking 
and setting micrometers.

Reading micrometers.....

Micrometers are calibrated in multiples of 25.  As seen 
above, the reading is .049

The above micrometer reading is .149
One hundred and forty nine thousandths.

The above micrometer reading is .174
One hundred and seventy four thousandths.

_______________________

Did you know that steel expands when hot?  Wood expands in humid weather?
Round steel often shrinks .001-.003 when frozen.  Some tools like shafts are 
often frozen in order to be installed.  The cold shrinks them, 
making installation possible in a tight fit.

_____________

Click on for tips on using calipers.

______

Rockler woodworking has Calipers

Pre-built, table saw crosscut sled

Table Saw Crosscut Sled

Want to sell your woodworking projects at a 
neighborhood fair, market, or craft shows?
Then you need a device to make components accurately
and consistently, with precision, and now it's possible.
Our books and jigs can be your solution.

Nowadays many are challenged when just a little bit 
more precision or expertise is required.  Be prepared.  Read 
about Jigs and gauges.

Here's the trick......Read..... About Ingenious Machines and Methods.

Like manufacturing?

Things you need to know....
How did the Industrial Revolution all begin?
What is a job shop? A short run?
What is a laser used for?  History, techniques, and famous 
industry icons.....many never heard of before
Read IMM...."Ingenious Machines and Methods"

Note: A micrometer should be adjusted and rechecked to a master gage 
when dropped. Also, wood and metal expand somewhat in hot weather, and 
contract in colder weather.  Always consider this, especially 
when doing precision work.

Somebody once said....
"Advice is seldom welcome, and those 
who need it the most, like it the least"

Inside story of what a table saw ....more

Now, New!...Build an accurate 
efficient method for your saw!  SAVE

Now, New!...Build your own accurate 
fence, learn the most efficient methods for your saw!  SAVE

See part 2
Using Calipers...

Secret Shame Exposed!
Instant Answers...box joint making secret tips.
Read more...

Instructors....make more than one 
with a Mascut 1.0.

A fluid exchange, a dialog of raw, technical know-how.

Those who build jigs  or fixtures in 
the shop, from the casual woodworker  to the automation technician or engineer begins to see 
the real value  of machines, not the basic, occasional, "pastime" value.  Hence...they have 
really learned a simple but necessary ingredient involved in making more things  with tools. 
Someone who learns how to use just simple, but accurate gauging  techniques can discover the 
true productive potential of a table saw. Then, not only  do tool users make nice box joints, but 
they can go on to apply the principles to  make many machines become more productive 
and yielding.  Box joints are like a "goals gateway."  They hone one's skill.  They're like a 
brain exercise.  

One of the biggest mistakes in woodworking is 

_______________

How to make 
woodworking more productive.

Eye candy and .......technology? 

Read about the 
Minnie Cut Jig
Ready to ship...

 More comments.  

"Excellent product and service.  Recommended, well designed and an excellent value!"
George.."Great service. Product well made and instructions excellent." cbeck 2008
George...."Very nice design, and well made! I can't wait to use it!" clifmeiste 2007
George...."Very neat item, makes box joint making enjoyable".....lagarti 2006

Make the most of your shop!
Why know how to make box joints?  Read Here

Table saw tips home page.. woodjig.com

How to really make box joints, finger joints...manual in 
minutes.....Box/finger joints

copyright 2009
Tags/Keywords...machining, caliper, production, micrometer, shop history, industrial, woodworking history, woodshop history, 
micrometer, calipers, History, Production, solutions. calipers, micrometer.. ebook, 50giants4us history, 
  ebook, tips.