Using a table saw

_{Now,
box joint solutions in an instant e-book...New, Updated Version...} _{After building and delivering over 100 jigs for making box joints....

_________________} "Box Joints and more for the Shop"
"All the details"

The clearest, most effective technique there is,
and it's all in this little known book. There really is
a "secret technique" to it. Knowing how to make
box joints is a genuine benefit in the shop.

Download size is approximately 6-700 KB, Windows
PC (98--Windows XP). Or, choose to just read it online.
PDF for MAC version upon request too.

Box Joints, or finger joints, are a durable and long lasting method
of jointing wood. They were used for years by industry for reliability
and were gradually taken over by plastic and cardboard boxes. A reason
for mastering them is that they can apply to woods that are normally
difficult to glue. Many exotic woods belong in this category as they
contain oils that can cause joint failure. Cheese boxes, guns, and shipping crates
were made with these joints for over a century. Companies use to have saws
dedicated with special blades, but they can also be made on a table saw
with a few very important procedures.

______________

Some people make box joints with ease, and others always get stuck, or
hung up on certain issues. Making box joints with ease is not an event, it is a
process in which certain steps can't be neglected. I have read, and followed
many techniques which failed to emphasize certain vital steps in the process.
After delivering my first 100 or so box joint jigs, I have established and
recorded a proven technique. This easy to follow book includes these vital steps,
and describes any additional tools, steps , vital accessories and details needed
to make them over and over again when needed.

With most plans, you are only explained the process and sequential
steps and tools needed. This book describes the key accessories and
devices which help you master them. To get box joints to be even, it helps to
follow the included "stock calculator." Plus, now you get a bonus section about the
historical milestones, events, and the men and machines who made industry real.
"Effective and thorough communication make a big difference and
waste is often "action without the right information."

"Box Joints and more for the Shop"
Index Page

Box Joint Jig
"Box joints are not unattainable anymore"
~Created by Woodjig.com~

"If you have ever tried another method, or tried to make box joints and had problems matching up the cuts, tear-out, alignment, and other problems, you will now be
on your way." If you are new at box joints, this will be a great jig and technique to learn with. This booklet includes a proven technique, with many new ideas and clear descriptions of the process. This material includes an accumulation of the most important tips.

CONTENTS:

Using your box joint jig:
Tools needed.
Our great new "Swift Way" to Line up the fence.
More misc. tips, suggestions, secrets and photos.
FAQ's for box joints.
E-mail questions about box joints.
Stock calculations are also included in this
handy, bonus E-booklet.

Go page 1

Also includes a very interesting, historical account of
many interesting and notable greats
in the history of science and the arts. Learn just how
influential these Giants were in this new E-book manual.........
Why I created this manual.

After building
close to 100 box joint jigs for customers, I discovered that most of the
technique has not been available to fully accomplish the task. Others
left out simple, important tools, details, and processes which took me years
to acquire. They are easy to make for some. But if you do
not read the "rest of the story", there are often too many obstacles
to perfection.

_____________________

"From all of the pictures I have seen of box joints, or
finger joints, I am confident that few people
have totally mastered them on a table saw until now."
George...Woodjig.com

Waste is often "action without the right information." Save many times
the price of this box joint manual in wood alone!

box joint manual
NEW!....Download's instantly ....24/7
Download size is approximately 6-700 kb.
Windows PC. 98-XP and up... You will be directed to download the full version.
$12.95
PAYPAL

For all other Credit cards...

Download's only..... 24/7
All Major Visa / MC Now $12.95
Download size is approximately 6-700 kb.
Windows PC. 98-XP and up... You will be directed to download the full version.
Here

Now, Includes a great preview to
"The 50 Giants Of Industry"
Archimedes, Euclid, Newton, and many more parallels to technology
and industry.....

The "50 Giants of Industry"
is a treasure trove of discoveries...a preview
is included with the "Box Joints and more e-book".....
Swarming with description, ideas, and clarity.

Observe all safety rules when using a table saw. Always use an overhead blade guard or a fixed blade guard on a crosscut fixture. Kickback can occur with a crosscut fence or rip fence. With a crosscut fence, it usually happens when your work piece is not held tightly, or it is tilted on your return cut. On your rip fence it occurs when your work piece binds between the blade and table saw fence. (Usually when an operator stops mid-cut and decides to back-up) Kickback is a violent launch of your work-piece and can be very dangerous.